|
Condensate Pump Model CPW15
The CPW15 condensate pump is designed specifically
for mounting on walls within coldrooms, (HT), or in close proximity,
for the drainage of condensate from unit coolers.
Operation:
The operation of the pump is controlled by a preset float switch via a
timer control unit. When the float switch is activated by a rising
water level the control timer delays the running cycle for
approximately 10 seconds. The running cycle will commence after the
delay and will continue to run for approximately 18 seconds. The
system will then reset in readiness fro the next cycle. The amount of
water removed per cycle will depend on the pressure head of the
installation.
Alarm Switch:
An additional float switch is available (as an extra) for alarm duty,
for connection to an external monitor.
Specifications:
| Full
weight: |
14kg |
|
Dimensions: |
400 x 300 x 120mm |
| Tank
capacity: |
7 litres |
|
Construction: |
Formed, 18swg
stainless steel |
| Pump
motor: |
Two stage,
centrifugal column pump connected to a permanent capacitor
induction motor, rated 0.5A. Thermally protected. |
| Pump
duty: |
Maximum lift 8
metres
Maximum flow volume 15 litres/minute |
|
Connections: |
15mm hose |
| Level
control: |
Float switch
initiation of the control unit timed cycle. (Delayed start 10
seconds, preset running cycle 18 seconds). |
|
Voltage: |
230V |
Performance: (Tested with clean cold water @20°C)
|
